Home › Server models › Dell E560F
Dell E560F
1U rack · 10 × 2.5" bays · 3 low-profile PCIe slots · in stock
Configure this rack server Browse all servers
Dell E560F configurations available
| Configuration |
|---|
| Dell VxRail E560F 1U 10S LGA4189 |
Dell E560F specifications
Dell VxRail E560F node
A VxRail node is a PowerEdge R640 in VxRail trim — same chassis, board and options, sold as part of a VxRail cluster. Trade listings describe it as "VxRail E560F, PowerEdge R640, 10-bay SFF 1U". Treat the R640 sheet as the hardware reference.
Hardware
- See
R640.md— 1U, two Intel Xeon Scalable (LGA3647), 24 DDR4 DIMM slots - E560F is the all-flash variant: 10 × 2.5" SFF front bays
- Commonly supplied with HBA330 (VxRail requires pass-through, not RAID) and mini-mono controller
- Typically 2–3 PCIe cards; NICs are often removed on resale units ("no NIC" in listings)
What differs from a plain R640
- VxRail firmware/licensing is tied to the cluster, not the hardware — a resold node is normally hardware only
- VMware vSAN requires a supported HBA in pass-through mode; a RAID PERC is not a substitute
- Node-to-node consistency matters: clusters expect matched CPU, memory and drives
What to confirm before quoting
- Controller fitted (HBA330 vs PERC) — it decides whether the node can rejoin a vSAN cluster
- Whether NICs and rails are present
- Drive population; all-flash (F) versus hybrid
<!-- source: Trade listings for VxRail E560F (PowerEdge R640 10-bay SFF) from pcserverandparts and TechMikeNY; hardware detail from the R640 specification. checked 2026-10-15 -->
Buying a Dell E560F from IT Server Exchange
Every unit is tested before it ships and its condition is stated up front. Build one to your own specification in the configurator — processors, memory, drives, controllers, network cards and rails are matched to this chassis, so the parts offered are the ones that fit — then send the configuration over and we'll quote it.