IT Server Exchange Configure a server All models

Home › Server models › Dell FC640

Dell FC640

1U sled · 2 × 2.5" bays · 16 DIMM slots · 2 sockets · in stock

Configure this sled Browse all servers

Dell FC640 configurations available

Configuration
Dell PowerEdge FC640 1U 2S LGA3647

Dell FC640 specifications

Dell PowerEdge FC640 (sled)

Form factor

  • Quarter-width sled; up to four per FX2 / FX2s 2U enclosure
  • FX2s adds eight PCIe 3.0 slots at the enclosure level

Processor

  • Up to two 1st or 2nd Generation Intel Xeon Scalable (LGA3647), up to 28 cores each

Memory

  • 16 DDR4 DIMM slots, registered ECC only (RDIMM / LRDIMM)
  • 1 TB RDIMM, 2 TB LRDIMM (the vendor's own pages disagree — confirm per unit)

Drive bays

  • Up to two 2.5" SAS/SATA HDD or SSD
  • NVMe with the optional Universal Backplane, up to 12.8 TB

Storage controllers

  • Software RAID S140, PERC H330, H730P, HBA330
  • Boot Optimized Storage System; internal dual SD module for OS or hypervisor

Network

  • Network daughter card: 2 × 10GbE + 2 × 1GbE, or 4 × 10GbE
  • iDRAC-integrated VGA

Power

  • From the FX2 enclosure: Platinum 1600 W, 2000 W or 2400 W, hot-plug, redundant fans

Management

  • iDRAC9 with Lifecycle Controller, iDRAC Direct, Redfish REST API
  • Chassis Management Controller (CMC) on the FX2

<!-- source: IT Creations FC640 node page; iDRAC version and memory max conflict within the page, checked 2026-10-15 -->

Buying a Dell FC640 from IT Server Exchange

Every unit is tested before it ships and its condition is stated up front. Build one to your own specification in the configurator — processors, memory, drives, controllers, network cards and rails are matched to this chassis, so the parts offered are the ones that fit — then send the configuration over and we'll quote it.

Configure a Dell FC640 →