IT Server Exchange Configure a server All models

Home › Server models › Dell R240

Dell R240

1U rack · 4 × 3.5" bays · 1 full-height + 1 low-profile PCIe slots · in stock

Configure this rack server Browse all servers

Dell R240 configurations available

Configuration
Dell PowerEdge R240 1U 4L LGA3647

Dell R240 specifications

Dell PowerEdge R240

Processor

  • One Intel Xeon E-2200 family (LGA1151), or Pentium / Core i3 / Celeron

Memory

  • 4 DDR4 DIMM slots, UDIMM up to 2666 MT/s, registered ECC, 64 GB max

Drive bays

  • Up to 4 × 3.5" cabled SATA/SAS/SSD
  • or up to 4 × 3.5" / 2.5" hot-plug SATA/SAS/SSD

Storage controllers

  • Internal: PERC H730P, H330, HBA330 (non-RAID), software RAID S140
  • External: 12 Gbps SAS HBA
  • Boot: BOSS with 2 × M.2 240 GB (RAID 1 or none), or 1 × M.2 240 GB
  • Internal dual SD module, 16/32/64 GB microSD

Expansion slots

  • Two PCIe Gen3: one x8 low-profile half-length (x4 width), one x16 low-profile/full-height half-length (x8 bandwidth)

Network

  • 2 × 1GbE LOM

Power supply

  • Single internal 250 W Bronze or 450 W Platinum

Management

  • iDRAC9 with Lifecycle Controller, iDRAC Direct, Redfish RESTful API
  • Front micro-USB 2.0 iDRAC port

Dimensions

  • 1U rack chassis; 434 mm wide, 595.63 mm deep (3.5" HDD config), 12.2 kg

<!-- source: xByte R240 product page, checked 2026-10-15 -->

Buying a Dell R240 from IT Server Exchange

Every unit is tested before it ships and its condition is stated up front. Build one to your own specification in the configurator — processors, memory, drives, controllers, network cards and rails are matched to this chassis, so the parts offered are the ones that fit — then send the configuration over and we'll quote it.

Configure a Dell R240 →