Home › Server models › Gigabyte H262-Z63
Gigabyte H262-Z63
1U sled · 2 low-profile PCIe slots · 16 DIMM slots · in stock
Configure this sled Browse all servers
Gigabyte H262-Z63 configurations available
| Configuration |
|---|
| Gigabyte H262-Z63 MZ62-HD0 1U LGA3647 |
Gigabyte H262-Z63 specifications
Gigabyte H262-Z63 (2U 4-node)
Form factor
- 2U rear-access chassis holding four nodes
- 440 × 87.5 × 840 mm
Processor
- Two AMD EPYC 7002 or 7003 series per node (Socket SP3 / LGA4094), cTDP up to 240 W
Memory
- 16 DDR4 RDIMM/LRDIMM slots per node, 8 channels per CPU
Drive bays
- 8 hot-swap 2.5" Gen3 NVMe/SATA bays (the datasheet doesn't split them per node — confirm per unit)
Expansion slots
- 8 low-profile x16 Gen4 slots
- 4 OCP 2.0 mezzanine slots (Gen3 x16)
- 8 internal M.2 slots (PCIe Gen3 x4)
Network
- 8 × 1Gb LAN (4 × Intel I350-AM2)
- 4 × 10/100/1000 management LAN, 1 CMC port
Power supply
- Dual redundant 2200 W, 80 PLUS Platinum, 100–240 V AC
Management
- ASPEED AST2500 BMC and AST2520 CMC, GIGABYTE Management Console
<!-- source: Gigabyte H262-Z63 (Rev. A00) datasheet, checked 2026-10-15 -->
Buying a Gigabyte H262-Z63 from IT Server Exchange
Every unit is tested before it ships and its condition is stated up front. Build one to your own specification in the configurator — processors, memory, drives, controllers, network cards and rails are matched to this chassis, so the parts offered are the ones that fit — then send the configuration over and we'll quote it.